Microcomputer controlled spring torsional fatigue performance machine TNS-WP series
l Applicable to Chinese test software of WINDOWS platform to realize test data collection and processing.
l Guided installation, user-friendly user interface; easy to get started, easy to operate.
l The program has the functions of real-time control, data acquisition, automatic calibration, automatic saving, drawing measured curves, artificially validating data, mathematical analysis, automatic generation of test reports, etc., and can define report form and content according to user needs.
l During the test, the torque, torsion angle, and real-time torque -angle curve are displayed in real time as the test progresses.
l Using the graphical operating system with graphical interface, you can set the display screen and control the operation panel; you can easily set the test speed and various control parameters; display the test results in real time; display various relevant parameter graphs in the test process in real time; Realize system diagnosis and display diagnostic results; access to test data can be achieved; and test machine action can be precisely controlled.
l Torque and torsion angle relationship curve can reflect the torque -angle relationship at any point , and can easily find the data point on the curve; it can conveniently zoom in and out on the curve.
l Manually or automatically clear the torque and angle measurement channels as needed.
l Auto save: Test conditions and test data are automatically saved and can be recalled at any time when needed.
Spesification
Mechanical car stabilizer fatigue testing machine
The WPJ-20 mechanical vehicle stabilizer fatigue tester uses a traditional crank-link mechanism to convert the rotary motion of the motor into a linear reciprocating motion , and then the swing lever drives the stabilizer bar to complete the reciprocating push-pull fatigue test of the stabilizer bar. In addition to the fatigue test, a static test test device has been added to the test bench. The stabilizer bar is not disassembled and can be tested for performance by rotating the position.
Spesification
Maximum test force (push-pull force): 20kN
Number of test stations: 1
Amplitude (swing arm stroke is the push-pull length): Max: ±100mm adjustable
Test frequency: 1-3HZ
The length of the stabilizer bar to be tested: 600 ~ 1500mm can be adjusted (manual mode)
Installation distance between two axes: 500~1200mm can be adjusted (manual mode)
The arm length of the tested stabilizer bar: 150~500mm can be adjusted (manual mode)
Length between the arm length and the length of the stabilizer bar: 0 to 200 mm can be adjusted (manual mode)
Number of trials Counter capacity: 9×10 9
Function: set the number of tests to stop automatically; the test piece breaks automatically and stops; both ends are loaded at the same time, that is, the two swing arms of the test piece simultaneously do the opposite movement
Display: Digital display or microcomputer displays the number of tests, test frequency, test start and stop time, etc.
Power supply voltage: three-phase four-wire system 380V, 50Hz
The adjustment of the test frequency of the equipment is realized by the frequency converter.
Amplitude adjustment The distance of the linear reciprocating motion can be adjusted by adjusting the eccentricity of the slider.
It has three directions of X, Y and Z pre-adjustment devices, which can be freely adjusted according to the length of the stabilizer bar, the arm length, and the angle between the arm length and the length.
The host part has a security protection network.
Toko Alat Uji 